BS3 switch mod for the I650

[girishsarwal]

Team,

This is really my first post and given my interest and qualifications in electronics,i though i could start with things that help back the community.

I've been able to rewire a BS3 switch on the Interceptor 650 with my LED headlight that has a DRL built in. My goal was to do this without any cutting of wires.

Here's a video of it. Plans and schematics coming soon that anyone is free to use to mod their Vehicle if required. Most welcome to answer any questions around this.


[MEDIA=youtube]oFZQ-1MT8mo[/MEDIA]

Thanks

Sent from my Redmi K20 Pro using Tapatalk

[Sajeesh]

Interested to see the plan. Also, whats the benefit of this setup?

Sent via Tapatalk

[girishsarwal]

Sure will be posting the schematics soon. The benefits I figure are

1. All lights are controlled with one switch on the RH. no additional switches on the crossbar.
2. If one has the original Halogen,the always on halogen pulls a lot of battery when the engine is off. A little rework can allow the parking light to be turned on instead of the dipper.
3. If using an LED based headlight, it comes with a DRL which stays either unused or lights up with the dipper in the normal connection or like 1 needs more switches on the crossbar/handlebar.

If one buys a BS3 switch for the bullet, while it's size compliant, it's not wiring compliant. My goal was to make it wiring compliant.

I am not quite well versed with the AHO guidelines so at your own risk disclaimer applies.

[girishsarwal]

The Schematic sheet is ready now. Attaching. Please feel free to ask any questions. Regular disclaimer "at your own risk" applies

[girishsarwal]

[QUOTE="girishsarwal, post: 28029, member: 16925"]
The Schematic sheet is ready now. Attaching. Please feel free to ask any questions. Regular disclaimer "at your own risk" applies
[/QUOTE]

Updated